[arriscad] Re: Arris95 issues

[Jim Bennett]

One thing that happens to us all the time is that if you have a network 
drive, sometimes the network drops it. This particularly happens if the 
computer containing the linked location goes off line for any reason 
(i.e. power drop, reboot, etc.). This requires the operating system to 
re-establish the link. ARRIS can't do this. The fix is to click on the 
mapped network drive in Windows Explorer, forcing Windows to reconnect 
the link.

Jim

On 2/21/2012 12:38 PM, Mark Keller wrote:
> Reset environmental defaults (GRSTD) in arris, deleted one menusize, 
> restarted system- still flashes.  It is our "S" drive, works in A94. 
> Not sure what is going on but clearly it is not finding stnds. It 
> stops loading (and starts flashing) at "loading symbol 
> library:fplan:y_fplan.sy".
> Mark
>
>
>
> On 2/21/2012 9:45 AM, Gary Thill wrote:
>>
>>
>>     Not sure what's going on, I assume the pathname to your Standards 
>> directory is rock-solid, right?
>>     If you haven't already tried this, try setting the GRSTD variable 
>> from within ARRIS by selecting
>>     the Custom menu (to the left of the load Plug-in menu), then 
>> select the INI icon (with shiny yellow
>>     cross) from the lower-right corner of the pulldown.  The first 
>> field in the ENVIRONMENTAL
>>     DEFAULTS MANAGER menu allows you to browse to set the STANDARDS 
>> DIRECTORY
>>     variable. By setting the variable through this menu it will 
>> prevent any typos or shared drives (S:\) that
>>     aren't accessible. Don't forget to select APPLY before exiting 
>> this menu.
>>
>>     Also, are the two entries in your arris.ini file GMENU SIZE=70 
>> and GMENUSIZE=75 conflicting
>>     with each other?
>>
>>
>>
>> GMENU_SIZE=70
>> GRUSRS=S:\cadd_files\arris_users\keller
>> GPLOTACCT=user
>> GMENUSIZE=75
>> GRSTD=s:\cadd_files\arris_users\kba_stnds
>>
>> Mark Keller wrote:
>>> Gary- I have A95 loading and running, until that is I add "GRSTD" 
>>> path to the ini file.  Then the status menu flashes and it won't 
>>> complete loading.
>>> Any ideas?
>>> Thanks
>>> Mark
>>>
>>> PS reloading user command bar seems a little snarky-  maybe because 
>>> stds isn't loaded?
>>
>
>
> _______________________________________________
> arriscad mailing list
> arriscad at lists.arriscad.com
> http://lists.arriscad.com/mailman/listinfo/arriscad

-- 
Jim Bennett, AIA
Product Director
Sigma Design
www.arriscad.com